- Grade 10 chromium steel balls

High-quality replacement headset bearings are smooth like butter. - Sealed cartridge bearing for long life - Durable steel bearing housing

KMC 3/16" Master Link Chain Links - For 3/16" chain, extra wide - Extra-wide, for non-derailleur bikes: BMX, cruisers, etc - Perfectly fits on KMC 415H & 415H-NP chains

KS Dropper Post Service Parts

- Replacement chain pins for Shimano 11-speed chains - Compatible with CN7900/7801 chains - 3 pins per pack

Shimano's Di2 Battery Charger Cable plugs into the Battery Charger (shown, but sold separately) so you can keep your electronic drivetrain at full power.

Shimano Di2 STI lever hoods. - Fits Ultegra ST-6870 Di2 levers only

All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Novara #Q28-4139 - (2) M4x8 Flat head screws included Note: This dropout is very similar to Wheels Mfg DROPOUT-243. Look carefully at the machined cutout on this hanger and Wheels Mfg DROPOUT-243 to determine which hanger fits your frame.

Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 240s Shim Ring

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings

KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs. - Compatible with KMC K710 and K710SL chains - No tools needed

Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right. - Made from Aluminum, anodized or polished finish, without logos - 1-1/8" Diameter - S.H.I.S. Stem Clamp Diameter: 28.6mm

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Star Ratchet Spring

These are the correct connecting links for SRAM's 12-speed Eagle chains. They are great for installing new chains and fixing chains on the road and trail, too. They come in a four pack, for use with four chains.

Power Links provide tool free chain assembly. - 8-speed width: 7.1mm - 9-speed width: 6.8mm - Chain Compatibility: SRAM - Reusable: Yes

- Missing links to make chain installation, maintenance and reparation easier - Card of 2

Problem Solvers' 11-speed Freehub Spacer converts your 11-speed freehub body to accept a 10-speed casssette. Use this spacer if you are running a 10-speed drivetrain on a new set of wheels with a 11-speed freehub body. The spacer is 1.85mmm thick.

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 240 Disc Ring Nut

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Spacer Sleeve - 15.4mm, for ratchet

Bottom bracket cup and spindle spacers for adjusting chainline or bearing play.

Compression ring fits above the upper bearing in a Cane Creek headset to ensure vertical and horizontal compression is optimal. - Compatible with 41mm and 42mm OD upper bearings

The Problem Solvers Seatpost Shim is what you need when your seatpost is a little too small-diameter to fit tightly into your frame. It's made of light, durable aluminum and has a lip on the top so it won't slide down inside the frame during installation.

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 3 Pawl Ring Nut

• Forged 6061 T6 alloy clamp • Safety lever clamping position follows clamp • Stops the QR lever from catching on things • Black anodized finish

40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets

- Missing links to make chain installation, maintenance and reparation easier - Card of 2

Hose Kits, Barbs and Strain Relief for Servicing Reverb Lines.

- Black carbon fiber weave headset spacers for tuning ride height - No logos - Includes five (5) 1-1/8" x 2.5mm spacers

The same bearings found in Trek and Gary Fisher full suspension bikes. - Refer to dimensions for best compatibility - A heavy contact seal provides the best defense against the elements - Refer to Service Manual for assembly instructions and service - The same bearings used in our bike assembly for proven quality - Wheel bearings are not an approved substitute for full suspension bearings

Custom Cane Creek lower race for Salsa.

FSA Standard Headset Bearings

- Compatible with KMC, Shimano 10 speed chains - DLC Coated - Reusable - No Tool Required - Card of 2 pairs

RockShox 32mm Seal Kit

The SRAM Universal Derailleur Hanger (UDH) consolidates thousands of hanger options across the industry, while protecting your derailleur against chain jams by pivoting back and out of the way, and slipping slightly when encountering impacts. It improves shifting performance, guarantees better alignment, and works with all drivetrains. - The Universal Derailleur Hanger consolidates thousands of mountain bike derailleur standards - UDH is designed to rotate rearward in the event of impact, and features the ability to “re-rail” the chain back onto the small cog - It works with all commercially available MTB and E-MTB drivetrains from Shimano to Box to Sunrace

Designed specifically for the Ritchey WCS Carbon Fork, this compression device secures the stem and headset for any fork with a carbon steerer. - Compression plug for carbon 1-1/8" steerers - Top cap fits 1-1/8" stems

- From a long line of tough, light-weight chain engineering from SRAM - Chain connector type: PowerLock - For Use with SRAM 12-Speed Road Chains Only - No tools necessary to install - Chain connector qty/packaging: 4

40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets

The Problem Solvers Compression Plug for 1 1/8-inch Forks is for threadless aluminum and carbon forks. It fits tightly inside the fork and provides easy headset adjustment and a nice, clean look.

Disc brake mount adaptor. - Includes stainless steel adaptor and caliper bolts

FSA (Full Speed Ahead) Chainring Bolts

FSA (Full Speed Ahead) Chainring Bolts

Rebuild seal kits for Fox rear suspension service and repair. - Includes parts needed for rebuild

40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets

Replacement headset bearings from FSA. - Compatible with most Trek MTB integrated headset systems - Sealed bearing for long life - Compatible with Knock Block Headsets

Enduro 24X37 ABEC-3 Sealed Bearing. Replacement bearing for Wheels Mfg bottom brackets for 24mm (Shimano) and 22mm/24mm (SRAM GXP) spindle cranks. ABEC-3 bearings are the most economical bearing Enduro offers but are extremely tough and durable. Grade 10 chromium steel balls are within 10/1,000,000" round. These are twice as round as the industry standard. 52100 high carbon chromium alloy races go through a vacuum de-gassing process resulting in the purest chromium alloy steel, hardened to R-62. Keeping everything together are riveted steel retainers and sealed with LLB type seals. - Dimensions: OD: 37mm / ID: 24mm / Width: 7mm - ABEC-3 - Grade 10, 5/32" chromium steel balls - Enduro Part # BB MR 2437 LLB-BLK - Imported - Sold in a bag of 2

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - CNC machined 6061 aluminum - Black anodized finish - Made in the USA

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA

Loose ball bearings in bags or bottles. - Replacement loose ball bearings

Wave Washers for adjusting bearing play in bottom brackets.

Trigger Clamp/Bolt Kit For X0 X9 X7

Hellbender bearings have an improved seal structure and are cross compatible with Cane Creek headsets.

FSA Standard Headset Bearings

FSA bearings that set directly into the frame without the use of pressed in cups. - 36/45 degrees is Cane Creek-compatible - 45/45 degrees is Campagnolo-compatible

RockShox 35mm Seal Kit

The Maxle Stealth offers a light, low-profile, tooled alternative to Maxle Lite. - 34g lighter than Maxle Lite - Easy installation with a 6mm Allen wrench

- Clamps to a threadless steerer - Offers up to 4-1/2" stem height increase - Forged 6061-aluminum provides extra strength - Machined aluminum top cap is threaded, providing easy installation